The figure below is of a RJ11 cable with a USB Type A connector, which is an alternative to using a DB9 RS232 to USB adapter. Connect the RJ11 cable (Image 1) seen in the above figure to the eTower.
Wall mounting bracket for the Freedom-Won eTower and Kodak BL3.6 batteries. The F-WON-E-TOWER-BRACK must be paired with the F-WON-E-TOWER-19-CLEAT.
Comes complete with 1 x e5000 plastic pedestal for tower stacking (cleats for 19" rack not included but available from if required).
Steel – painted white, rated for indoor use only, out of direct sun and away from other heat sources. 2 x M6 bolts each for positive and for negative terminals for DC leads to inverter and busbars for
DC Connection - Integrated Terminals on Front 2 x M6 bolts each for positive and for negative terminals for DC leads to inverter and busbars for connection of
There are three fixing threads on each side of the module near the front, as indicated, that match the 19” rack mount brackets available from Freedom Won on request.
Gain easy access to spec sheets and additional documentation for all our products and ranges by downloading them directly from this page.
The lugs for the eTower end of the DC cables are already fitted and the terminal bolts are long enough to accommodate both a busbar and a lug on the same
Correct CAN Bus communication can be verified by observing whether the Freedom Won LiTE battery is presented in the GX-device list under the name “Freedom Won LiTE” or “eTower”.
The eTower is simple to connect and the required accessories are all included in the box. The supplied tower interconnecting busbars must be connected as illustrated in Figure 2,
PDF version includes complete article with source references. Suitable for printing and offline reading.
